support frame (see note) note1: overall clearance of 2.30mm required (in detail area shown only) for activation spring during insertion & withdrawal weight: approx. 2.50g insulation resistance: > 1000 m ? / 500 vdc storage temperature: -40c, ~ +60c contact principle: friction technology wave: not applicable storage humidity: 10% ~ 95% rh operating position: shaft up/down/horizontal vaporphase: 215c, 30 sec. max. thermal shock: -40c, ~ +60c, 5 cycles durability: 5,000 cycles min. ir reflow: 260c, 15 sec. max. damp heat: 40c, 90% rh, 500hr insulation material: thermoplastic, ul94v-0 manual soldering: 360c, 3 sec. max. salt-mist: 35c, 5% nacl, 48hr contact material: gold plating with 3u? min. operating temperature: -25c, ~ +85c contact resistance: 100 m ? max. operating humidity: 10% ~ 95% rh 4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com number of contacts SIMS60 ordering information lf - -- 6 or 8 lead free packing information f = reel x 20 f recommended pcb layouts general tolerance0.002 sim card connector terminal no. pin no. pin 1 pin 2 pin 3 pin 5 pin 6 pin 7 gnd: pwr signal and gnd vcc: pwr signal and gnd vpp: programming voltage rst: reset signal i/o: serial date input/output clk: clocking signal pin 4 reserved pin 8 reserved card eject position card lock position push stroke circuit diagram for card detect switch card detect switch normal....short inserting card....open gnd 0.029 (0.75) 0.823 (20.9) 0.197 (5.0) card center 0.052 (1.32) 0.079 (2.00) 0.6200.004 (15.75) ?0.0310.002 (0.80) 0.5510.004 (14.00) 0.596 (15.15) 0.067 (1.70) 0.0350.004 (0.90) 0.114 (2.90) 0.295 (7.50) 0.035 (0.90) 0.045 (1.15) 1.002 (25.45) 0.008 (0.20) 8p=0.35 (8.89) 0.75 (19.10) 0.004 (0.10) 0.050 typ. (1.27) 0.031 ( 0.80) 0.047 (1.20) 0.05 0.2000.004 (5.10) 0.053 +0.02 -0.00 (1.35) 0 . 6 2 0 0 . 0 0 2 ( 1 5 . 7 5 ) 0.834 +0.02 -0.00 (21.20) 0.079 (2.00) 0.02750.004 (0.70) 2-?0.035 +0.004 -0.00 (0.90) 0.063 +0.016 -0.00 (1.60) p1 p5 p2 p6 p3 p7 cd p4 p8 0.2760.002 (7.00) 0.082 (2.10) overall height (see note 1) activation spring 2.3mm clearance required (see note 1) gnd gnd overall length: 1.055 (26.80) 0.018 (0.45) 6p=0.25 (6.35) 0.004 (0.10) 6p=0.295 (7.50) 8p=0.395 (10.04) 6p=0.250.002 (6.35) 6p=0.1210.002 (3.07) 8p=0.2210.002 (5.61) 6p=0.2950.002 (7.50) 8p=0.350.002 (8.89) 8p=0.3950.002 (10.04) 0.5510.002 (14.00) major league electronics 6 or 8 pin push/push type surface mount sim connector 19 apr 07 SIMS60 series sim card connector push/push type 6 or 8 pin
4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com revision b - (26th jul 2010) plating information added to specification revisions 19 apr 07 SIMS60 series sim card connector p us h / p us h t ype 6 o r 8 pin
|
